New Passive Direct Box


FourStar Wire and Cable, Inc. now offers the MyStarSound Passive Direct Box. A cost effective, road worthy, and necessary tool for the Pro Audio World.

Specs:

OUTPUT:
A 3 pin XLR type connector giving a floating output with a nominal level of 10mv, suitable for most microphone mixer inputs. Wiring to nominal balanced twin screened cable as follows:
Pin1- Earth braid
Pin2-Red Wire (signal positive/hot)
Pin3-Black Wire (signal negative/cold)
For connections to unbalanced inputs use pins 1 and 3 joined together as earth or ground, and pin 2 as signal positive (hot). If the mixer input connector is an unbalanced jack then XLR pins 1 and 3 go to sleeve and pin 2 to tip.

INSTRUMENT INPUT:
This input is for low level signals (Maximum 3v), having a high impedance suitable for musical instrument pickups. Use the switch<INST/SPKR>on "INST" position.

SPEAKER INPUT:
This is a high level input (max 100V) suitable for use with loudspeaker circuits including 100V line PA amplifier output. Use the switch <INST/SPKR>on"SPKR"position.

SPECIFICATIONS:
Frequency Response: 10Hz~30KHz
Load Impedance: >600 Ohm
Input: 1/4" jack unbalanced
Link Output: 1/4" jack unbalanced
Output XLR balanced
Maximum input level:+10/+50dBu