Newly Listed Extreme Gold Series Cables for the recording studio !!!

Click here to download the pdf

New Passive Direct Box FourStar Wire and Cable, Inc. now offers the MyStarSound Passive Direct Box. A cost effective, road worthy, and necessary tool for the Pro Audio World. Specs: OUTPUT: A 3 pin XLR type connector giving a floating output with a nominal level of 10mv, suitable for most microphone mixer inputs. Wiring to nominal balanced twin screened cable as follows: Pin1- Earth braid Pin2-Red Wire (signal positive/hot) Pin3-Black Wire (signal negative/cold) For connections to unbalanced inputs use pins 1 and 3 joined together as earth or ground, and pin 2 as signal positive (hot). If the mixer input connector is an unbalanced jack then XLR pins 1 and 3 go to sleeve and pin 2 to tip. INSTRUMENT INPUT: This input is for low level signals (Maximum 3v), having a high impedance suitable for musical instrument pickups. Use the switchon "INST" position. SPEAKER INPUT: This is a high level input (max 100V) suitable for use with loudspeaker circuits including 100V line PA amplifier output. Use the switch on"SPKR"position. SPECIFICATIONS: Frequency Response: 10Hz~30KHz Load Impedance: >600 Ohm Input: 1/4" jack unbalanced Link Output: 1/4" jack unbalanced Output XLR balanced Maximum input level:+10/+50dBu