Built in the USA by

Four Star Wire and Cable

Visit our parent company Four Star Wire & Cable

for all your wire, cable and connectivity  needs

PRO SERIES QUIET GUITAR/INSTRUMENT CABLES

These cables are the answer for the musician who changes
instruments frequently and doesn't want the pop and hum that
invariably comes with pulling a live cable out of it's jack. Utilizing our
20 gauge instrument cable with Amphenol brand Q-plugs in a choice of straight or right angle ends, these specialty cables are sure to eliminate one more source of unwanted stage noise.

Part Numbers:
FPI-10Q 10ft.
FPI-15Q 15ft.
FPI-20Q 20ft.
FPI-25Q 25ft.

Options are available by simply adding the appropriate letter after the part number: R for a right angle Q-plug; G for a gold Q-plug; RR
for both ends right angled.(although only one end need be Q equipped)


STAGE SERIES INSTRUMENT CABLES

The Stage Series of guitar cables are designed for the musician who desires a quality cable that looks good, sounds good, and is
affordable. These cables carry a ten year warranty, and utilize our
heavy duty 24 gauge instrument wire with quality 1/4î connectors for a cable that is a substantial cut above standard quality.

Part Number:
FSLI-2 2ft.
FSLI-3 3ft.
FSLI-5 5ft.
FSLI-10 10ft.
FSLI-15 15ft.
FSLI-20 20ft.
FSLI-25 25ft.

For a right angle end, add R after the part number, or RR for both
ends right angled.


PATCH CABLES BALANCED

Our balanced patch cables are designed to deliver the full spectrum of sound in all situations, from recording studio to live sound
reinforcement. We build them with our best 20 guage, 2 conductor, 95% braided shield wire, with Amphenol 1/4 TRS plugs as standard, or XLR male or female as options to suit any need. As with all our Pro Series cables, the MyStarSound balanced patch cables come with heat shrinked ends and carry our lifetime guarantee. Standard lengths are listed below, custom lengths available.

Part Number Length
FPB- 1 1ft.
FPB- 3 3ft.
FPB- 6 6ft.
FPB- 10 10ft.
FPB- 15 15ft.
FPB- 20 20ft.
FPB- 25 25ft.

Options are available by simply adding the appropriate letter after the part number. For a male XLR end, add ìXMî; for a female XLR end add XF; for Gold ends add G. If this option is ordered along with an XLR end, the XLR will come with a Black chrome shell and Gold contacts.


PATCH CABLES UNBALANCED

Designed for use in those inter-connect situations where balanced isn't applicable, our unbalanced cables feature our special 20 gauge single conductor wire with RCA ends. Optional ends are listed below.

Part Numbers:
FPUB- 1 1ft.
FPUB- 3 3ft.
FPUB- 6 6ft.
FPUB- 10 10ft.
FPUB- 15 15ft.
FPUB- 20 20ft.

Options: add Q for 1\4 male; QFfor 1\4 female; G for Gold ends.


FLEX MESH
Our high quality Pro Series Microphone and instrument cables now are available with a protective and flexible mesh wrap for added durability and mobility, as well as quick and easy tracing in multiple cabling situations by using any one of up to ten different colors. Our shrink wrapped connector protectors allow for greater strength and reliability, and can be customized with your company logo or name. MyStarSound cables are available in a variety of lengths, and a choice of connectors, including Neutrik and Amphenol. Custom cable lengths are available by special order.

DUAL PATCH CABLES

Arguably one of the handiest cables in the sound mans arsenal, these assemblies can be used to interconnect various pieces of stereo equipment together in the recording studio, home, or to a live sound system. We offer our dual patch cables with our custom made dual 20 gauge single conductor wire and RCA ends marked for left and right channel, respectively.
Part Numbers :
FPDP- 1 1ft.
FPDP- 3 3ft.
FPDP- 6 6ft.
FPDP- 10 10ft.
FPDP- 15 15ft.
FPDP- 20 20ft.For optional 1/4" ends, add QM after the part number. For Gold
connectors add G.



*NEW* Extreme Studio Gold Recording cables

The Pro Series Extreme Studio Gold Recording cables feature a 24 AWG \ 2 twisted pairs of 41 strand pure copper conductors and a 95% braided shield, and heavy duty TPE rubber Jkt.

Equipped with the Neutrik NP series connectors. The Extreme Studio Gold cables come with same MyStarSound lifetime warranty. Available in Instrument, Microphone, and Patch Cables. Designed to be ULTRA Quiet while enhancing the pure sound of your instrument, microphone and recording equipment.


*NEW* PRO TOUR PLUS INSTRUMENT cables
The Pro Tour Plus Series of instrument cables are nothing short of the BEST, constructed using our
finest 20 gauge, 41strand copper conductor cable for the ultimate in fidelity. The 95% spiral shield protects from outside interference and is covered by our TPE outer jacket that stands up to the rigorous demands of on-the-road usage, is quite flexible, and stays straight when unrolled from storage. Neutrik connectors are standard, and both ends are sealed, then covered with heat shrink for additional strain relief.


PRO SERIES GUITAR / INSTRUMENT CABLES

The Pro Series of instrument cables are constructed using our
finest 20 gauge, 41strand copper conductor cable for the ultimate in fidelity. The 95% spiral shield protects from outside interference and is covered by our TPE outer jacket that stands up to the rigorous
demands of on-the-road usage, is quite flexible, and stays straight
when unrolled from storage. Amphenol connectors are standard, and both ends are sealed, then covered with heat shrink for additional strain relief. Dealer information can be imprinted on the heat shrink in your choice of colored shrink tubing. As with all the Pro series cables, these are covered by a lifetime warranty.

Part Numbers:
FPI -2 2ft.
FPI -3 3ft.
FPI -5 5ft.
FPI -10 10ft.
FPI - 15 15ft.
FPI - 20 20ft.
FPI -25 25ft.

Our Guitar / Instrument cables can be ordered with any of several
options to suit your needs including; Amphenol right angle plugs,
Gold ends, or Neutrik Deluxe NP series ends. Simply add the
appropriate letter to the part number for any option desired: R for a
right angle end; G for gold ends; N for Neutrik deluxe connectors.
For a cable with both ends right angled use RR after the part
number.


PRO SERIES STEREO GUITAR CABLES

These specialty cables are designed for stereo instruments that send the left channel signal to one amplifier, and the right channel signal to another.This set-up is being used by many of todays guitarists whoare using a dual transducer equipped instrument (i.e. Acoustic \ Electric) and need to connect to a traditional guitar amplifier,as well as an acoustic amplification system. Our stereo guitar cables are a variation on the standard wye cable and come in four standard lengths, although custom lengths may be special ordered. These cables are constructed with dual 20 gauge instrument wire and your choice of straight or right angle TRS plugs on the instrument end. The amplifier ends are straight 1\4" plugs. These assemblies are lifetime warrantied, and as with all of the Pro Series cables, the ends are sealed with heat shrink and appropriately labeled.

Part Numbers:
FPSI-15 15ft.
FPSI-20 20ft.
FPSI-25 25ft.
FPSI-30 30ft.

The (legs) of the wye are 4 feet long for a total spread of 8 feet
between the ends. Please add R to the part number for a right
angle TRS end; or G if Gold ends are desired.


PRO SERIES STOMP BOX SPECIALS
PAIRED CABLES FOR EFFECT BOXES

Having a guitarist on staff has led us to produce these sets of short
instrument cables made just for the musicians (guitarists) out there
who use two or more floor effect boxes and want a reliable
connection between them. These handy cables are packaged in pairs only, in three sizes to allow for cabling together any pedal on any pedal board. All ends use Amphenol right angle plugs, with our easy flex 20 gauge instrument wire and heat shrink on both ends.

Part Numbers:
FPIP- 1 2 @ 6"
FPIP- 2 2 @ 12"
FPIP- 3 2 @ 18"


INSERT CABLES

These cables are used to patch in (insert) effect units to a single
channel, or group send, on mixing consoles. Utilizing a stereo 1/4"
TRS plug that splits to a pair of 1/4" ends labeled in/out, we build
them with our dual 20 gauge cable and heat shrink all ends. Standard lengths are listed, for custom lengths call for details.

Part Number Length
FPIN- 3 3ft.
FPIN- 6 6ft.
FPIN- 10 10ft.
FPIN- 15 15ft.
FPIN- 20 20ft.

If Gold ends are desired, simply add G after the part number.


WIRELESS CABLES

Even though we're talking wireless here, reliable cabling is still needed to get the signal from the source (Instrument) to the transmitter.MyStarSound has the same pro quality cabling for such situations, using our best 24 gauge flexible-but-thin cabling and your choice of connectors for use with all brands of wireless equipment. Available in standard lengths with your choice of a
straight or right angle connector on the instrument side, and a choice of connectors on the transmitter side to match the brand of wireless system used.